Areyourshop 75wxst Cb Radio Mic Mount Holder Passenger Grab Bar For Wrangler Jl 2018+

Areyourshop 75WXST CB Radio Mic Mount Holder Passenger Grab Bar for Wrangler JL 2018+

• Make sure this fits by entering your model number.
• 1: This NEW JL Mic Mount allows you to mount your 75 WX ST CB mic in a great, easily viewable location.
• 2: This mic mount has been custom designed for the interior of the all-new JL Wrangler. There is NO cutting or drilling required and the Mic Mount can be installed in just a few minutes.
• 3: The Mic Mount has been designed to angle the display toward the driver for great visibility and the mic and cord will NOT contact or make any noise with any other interior parts or trim pieces.
• 4: Our kit included Cobra 75 WX ST CB mic clip, stainless steel screws and locknuts, will install directly on to this mount to make the job even easier! To mount other devices, simply mark and drill the JL Mic Mount prior to installing it and you will have an excellent, easy-to-install, versatile bracket!
• 5: The JL Mic Mount does NOT require any drilling or other mods to the dash of your 2018+ JL Wrangler.

Buy Now : Areyourshop 75WXST CB Radio Mic Mount Holder Passenger Grab Bar for Wrangler JL 2018+

Brand : Areyourshop
Category : Electronics,GPS, Finders & Accessories,GPS System Accessories,Vehicle Mounts
Rating : 4.3
Price : US $14.99
Review Count : 133

Areyourshop 75WXST CB Radio Mic Mount Holder Passenger Grab Bar for Wrangler JL 2018+

• In concept this is great, easy install and I like the mic position, but the control panel would not go back in and sit flush on either my JT or my wife\'s JL despite multiple attempts to tweak its position. Makes the whole dash look like it was jacked up. Would return if it hadn\'t taken me so long to install them.
• You have to remove the controls cluster with an interior removal tool (basically a plastic pry bar). It pops off easy, just make sure you put the ignition side in first when you pop it back on. The part fits good and is held on by the screw from the dash bar. I had to slightly bend my back so the Midland handset wouldn\'t rub on the dashboard.
• Much easier to install than the previous product I had on my gladiator. When I traded it in I knew I wanted something easier to install that was just as sturdy and this product delivered. Install was easy, maybe 5 minutes? The design is solid and held in place by the OEM handle and plastics, would recommend!
• Though visible in pics, it\'s worth mentioning since no one else seems to want to. When reinstalling the control panel, there will be a gap, it will not sit flush with the dash.
• My microphone has a non-standard mount so I did a lot of searching for something that might work. This design is great, sturdy, and priced right. I didn\'t use the enclosed mic mount but used a 3M adhesive backed metal hook instead. This is temporary as the adhesive won\'t stand the summer heat. I will probably make a small metal bracket to mount into the existing holes that will allow me to move my microphone farther to the right as well as clip on a hand-held transmitter. Easy to install. Just loosen the 10mm bolt holding the panic bar and slide the bracket down the back. The two holes in the bracket align with protruding tabs next to the bolt. Again, great design...
• Very easy to install. Took less then two minutes. Just pop off center trim cluster. Loosen the 10mm bolt that holds the passenger grab bar. Slide in mount, tighten bolt and reinstall the center trim cluster.
• Super easy install and fits perfectly. No worries of the mic coming dislodged.
• The media could not be loaded.  Product was super easy to install all you need is the items that are pictured. A 10 mm socket and a plastic trim removal tool. It took less than 10 minutes to install this. I don’t know what all the complaints are except operator error, possibly.As you can see by the finished install it looks great and very sturdy

Location:

Share :