Dymoece Out Front Combo Mount,Bicycle Handlebar Mount For Wahoo Elemnt,Elemnt Bolt,Elemnt Mini And B
Dymoece Out Front Combo Mount,Bicycle Handlebar Mount for Wahoo Elemnt,Elemnt Bolt,Elemnt Mini and Bike Lights,Compatible Handlebar Sizes 31.8mm 25.4mm
- Make sure this fits by entering your model number.
- Material:Aluminum alloy 6061
- Compatible with wahoo elemnt,wahoo elemnt bolt, wahoo elemnt mini,sport action camera and bicycle Lights
- This combo cycling mount heads-up positioning provides increased safety and optimize your visual angle at the same time ,so that you can take full advantage of your edge's capabilities without compromising your ride
- Recommended Use: cross-country, road cycling etc
- Light weight,durable and easy to install
Brand : Dymoece
Category : Electronics,GPS, Finders & Accessories,Sports & Handheld GPS,Cycling GPS Units
Rating : 4.5
Price : US $23.99
Review Count : 114
ChildASIN : B07RSRQXVF,B07RSS3CNT
Dymoece Out Front Combo Mount,Bicycle Handlebar Mount for Wahoo Elemnt,Elemnt Bolt,Elemnt Mini and Bike Lights,Compatible Handlebar Sizes 31.8mm 25.4mm
- I have 4 different bikes I want to move my original Elemnt to, and the new Wahoo brackets for the Roam are too small..I love the outfront placement and this is THE ANSWER. Probably stronger than the original...and the originals are NOT available any more. Perfect solution, fit, etc.
- When assembling a new-to-me bike, I needed a mount to either combine the head-unit and headlight, or move the mount to the right side of the stem from the default left of the stock Wahoo mount. This Dymoece seemed to fit the bill and was substantially less expensive and less logo-covered than the K-Edge and Barfly options. So far I\'m quite impressed - unlike other reviewers experiences, this seems sturdy enough over the brutally pothole\'d surfaces of SoCal. I will report back if it fails.Moving the headlight out front under the head unit is a nice bonus, though I fear I\'m going to lose the rubber o-ring thing as compared to a captive velcro strap like the Two Fish Lockblock holder. Maybe I\'ll experiment with a mashup between the lockblock and gopro mount.Knocking a star from this as it does not have an integrated rubber strip to keep it from destroying the finish of the bars like many similar mounts now do. It\'d also be nice if the corners were radiused a little more gently, but that\'s just a nice-to-have.Edit: 2 months in and this is still going strong, maybe I got a lucky break. I always ride with the head unit and a 120g light mounted below per the pic; have lightly crashed once and ride \'cobbles\' and chopped up pavement regularly on 28s.Obligatory bike industry rant: I wish the big vendors like Giant and Trek would move toward native accessory mount points for things like head units and lights (come on; we\'ve had bottle cage mounting bosses for literal decades now and could use the same \"technology\" for other things that everyone puts on their bikes) to render clamp mounts unnecessary, but this seems like a weirdly persistent anachronism for a market that prides itself on other unnecessary tech advances every year to sell more product. ¯\_(ツ)_/¯
- I really wanted to like this mount. As a substitute for the K-Edge at such a great price this could have hit the nail on the head. It\'s solid aliuminium, non-branded and the color blends into the bars well. The only reason I\'m docking a star is purely cosmetic, and maybe some function. When mounting a bolt on this mount, there is not enough offset in the mount to allow the screen of the unit to sit flush with the bars. With this, the headunit ends up a few cm higher than the bars which disrupts some of the asthetic. Contrast this to the OEM bolt mount which has enough verticall offset to adjust the face level. However, if this does not bother you, then I 100% recommend this mount
- Good value for money. Fits snugly on a 31.8mm bar. While the aluminum arm will not hold tons of weight, it shouldn’t have to. Weak link is the machine screw that clamps it to the bars, would be careful and not overtighten it. Also wish that screw was captive so it doesn’t fly away. Holds my Wahoo BOLT and my Bontrager iON light and looks good doing it.
- Mount appears to be sturdy enough. It is slimmer than some other mounts I have used which is a good thing. This mount allows me to get my headlight off the handlebar under my Wahoo Roam. Only thing I would change would be to place the clamp bolt on top instead of on the bottom, minor inconvenience.
- This is perfect for my needs. It holds the cyclometer and GoPro up and out a few inches from the handlebars so the drops don\'t show in the frame. All metal so doesn\'t shake and clamps down tightly. Also the clap itself is a little thinner than the plastic mount my Wahoo Fitness ELEMNT comes with so it takes up slightly less room on the bars. Only minor issue is that because it is all metal, the GoPro mount doesn\'t clamp down quite as tightly as a the plastic mounts so sometimes the camera tilts up a little bit.
- I love this mount. I really wanted a single solution for mounting my light and my computer, since I really don\'t like to have too much clutter on the bars. I bought this so I could try the rubber band as a solution since there aren\'t a lot of lights that use the friction flange like a GoPro. I didn\'t love that, but I was able to modify a mount for a Cygolite to use on my generic headlight. This combo is killer for a budget light mount.
- So far, this has worked out great for me. My only complaint is that the angle you spin the Bolt to attach it to the mount is different that the standard Bolt mount. I\'ll get over that, though.
Post a Comment for "Dymoece Out Front Combo Mount,Bicycle Handlebar Mount For Wahoo Elemnt,Elemnt Bolt,Elemnt Mini And B"